top of page

Air Quality Monitoring: Understanding PM2.5, PM10 and NO₂ Measurements

Nov 12
4 min read

Air quality is an important factor in public health and urban environmental management. Road traffic, industrial activities, building heating and weather conditions influence the concentrations of pollutants in the atmosphere.

Understanding these variations requires monitoring parameters such as particulate matter (PM2.5 and PM10), nitrogen dioxide (NO₂) and carbon monoxide (CO).

But what do these indicators measure, how should their values be interpreted, and what information can an air quality monitoring system provide?


What Are PM2.5 and PM10?

Particulate matter (PM) consists of a mixture of solid particles and liquid droplets suspended in the air.

These particles are classified, among other characteristics, according to their aerodynamic diameter:

  • PM10: particles with an aerodynamic diameter of 10 micrometers (µm) or less.

  • PM2.5: fine particles with an aerodynamic diameter of 2.5 micrometers (µm) or less.

PM2.5 is a subset of PM10. Due to their small size, fine particles can penetrate deeply into the respiratory system, and exposure is associated with significant health effects.

Atmospheric particles originate from various sources, including fuel combustion, road traffic, industrial activities, resuspended dust and natural processes. Some particles also form through chemical reactions in the atmosphere.


Understanding NO₂ and Other Gaseous Pollutants

In addition to particulate matter, air quality monitoring may include several gaseous pollutants.

Nitrogen dioxide (NO₂) is primarily associated with combustion processes. Road traffic and combustion installations are important sources. NO₂ affects the respiratory system and participates in atmospheric reactions that contribute to ground-level ozone and secondary particulate matter formation.

Nitric oxide (NO) is emitted during combustion and can be converted into NO₂ in the atmosphere. Monitoring both compounds can provide additional information about nitrogen oxide concentrations.

Carbon monoxide (CO) is produced mainly by incomplete combustion. At high concentrations, it interferes with the body's ability to transport oxygen.

Carbon dioxide (CO₂) is a greenhouse gas generated by both natural processes and human activities. Although monitoring CO₂ serves specific environmental purposes, it should not be confused with the pollutants commonly used to assess compliance with European ambient air quality limits for PM2.5, PM10 or NO₂.


Why Do Weather Conditions Matter?

Air pollutant concentrations depend on more than emission levels.

Temperature, humidity, wind, precipitation and atmospheric stability influence pollutant dispersion, transport and chemical transformations.

For example, when atmospheric dispersion is limited, pollutants can accumulate near emission sources. Under other conditions, air circulation may support their dilution and transport.

Weather conditions can also influence the performance of certain air quality sensors. High humidity, temperature fluctuations and instrument characteristics must be considered when interpreting measurements.

Monitoring pollutants alongside atmospheric parameters therefore provides useful context for understanding changes in air quality.


What Do WHO Guidelines and European Regulations Establish?

In 2021, the World Health Organization (WHO) published updated air quality guidelines based on scientific evidence concerning the health effects of air pollution.

The WHO recommended annual average concentrations are:

  • PM2.5: 5 µg/m³

  • PM10: 15 µg/m³

  • NO₂: 10 µg/m³

These are health-based recommendations, not legally binding air quality limits.

In the European Union, Directive (EU) 2024/2881 establishes updated ambient air quality standards.

The annual limit values to be attained by 1 January 2030 include:

  • PM2.5: 10 µg/m³

  • PM10: 20 µg/m³

  • NO₂: 20 µg/m³

These values represent the standards established for 2030 and should not be described as limits already applicable in November 2026.

Regulatory compliance assessments require appropriate evaluation methods and adherence to the data quality requirements established by the applicable legislation.


What Can Local Air Quality Monitoring Reveal?

Local monitoring provides information about measured pollutant concentrations at selected locations and how those measurements change over time.

Depending on sensor configuration, installation conditions and data quality, monitoring results can support:

  • Identification of daily and seasonal variations in monitored parameters.

  • Comparison of concentration trends over different periods.

  • Detection of elevated readings that require further investigation.

  • Analysis of relationships between air quality measurements and weather conditions.

  • Environmental research, public information and management activities.

An important distinction must be made between supplementary monitoring and monitoring used for official regulatory compliance assessments.

Sensor-based systems can provide useful information about local environmental conditions. However, regulatory use of their data requires compliance with the applicable technical and legal requirements.


SmartAir City: Environmental Monitoring Through a Digital Platform

SmartAir City is an IoT-based solution developed by SYSWIN SOLUTIONS for monitoring outdoor air quality and environmental conditions in urban and industrial areas.

Depending on the selected configuration, the solution supports the monitoring of parameters such as PM1, PM2.5, PM10, NO, NO₂, CO and CO₂, alongside air temperature, relative humidity and atmospheric pressure.

Measurements are transmitted to a centralized digital platform that supports parameter visualization, historical data access, trend analysis and configurable alerts.

SmartAir City can be used in urban environmental monitoring projects, industrial areas, research initiatives and educational applications, depending on project-specific requirements.

By centralizing environmental measurements, the platform supports access to relevant information about conditions at monitored locations.


Conclusion

Understanding air quality begins with knowing what is being measured and under which conditions the measurements are collected.

PM2.5, PM10 and NO₂ are important air pollution indicators. Correct interpretation requires consideration of averaging periods, meteorological conditions and measurement quality.

IoT monitoring solutions can complement existing environmental information by providing local measurements and digital analysis capabilities.

Discover SmartAir City, the SYSWIN SOLUTIONS platform for air quality and environmental monitoring.




References

Comments


bottom of page